b'CYLINDERS AND TANK EQUIPMENTLIFT TRUCK CYLINDER RELIEF VALVEDesigned specifically for use as a primary relief valve on DOT lift truck cylinders.All containers used in industrial truck service, including lift truck cylinders, should have the relief valve replaced with a new or unused valve within 12 years of the manufacture date of the container and each 10 years thereafter. Can be used on cylinders up to 100 lbs. LP-Gas capacity.Inlet PressureConnection SettingPART No.(IN.)(PSIG)20703/4 - 14 NPT375LIFT TRUCK AND ENGINE FUEL VALVEDOTLifttruckServiceValveDesigned to allow either vapor or liquid withdrawal. Integral excess flow valve helps prevent excess product loss in the event of fuel line rupture. Must be used in a cylinder with an independent pressure relief valvesufficient for cylinders capacity. Stem design features a double O-Ring seal to provide extra protection from leakage. Extra low profile reduces potential for valve and handwheel damage when cylinders are stacked on each other.Inlet Outlet Excess ForConnection Connection Flow ServicePARTNo. (IN.) (IN.) Valve Marked20753/4-14 NPT3/8-18 NPT1.6 GPMLiquidFIXED LIQUID LEVEL GAUGESLarge knurled knob for easy gripping when wearing gloves. Knurled knob is retained to prevent dropping or lost plugs during fillings. Designed to provide a visible warning when containers are filled to the maximum permitted filling level.Inlet DiptubeConnection LengthPARTNo. (IN.) (IN.) Service20651/4 NPTNoneCylinderLIFT TRUCK BACK CHECK CONNECTORSThese quick closing couplings are designed to join the fuel line to the service valve on motor fuel type applications. ACME thread allows quick hand-tight assembly.Back checks automatically close when disconnected.2088 Inlet OutletPARTNo. Connection Connection Application20881-1/4 F ACME1/4 FNPTFuel Line20893/8 FNPT1-1/4 M ACMEService Valve2089 2089-GASKETSecondary Gasket Seal2089-ORPrimary Gasket Seal83'