b'LIQUID FILLED PRESSURE GAUGES Glycerin Liquid Gauge#304 Stainless Steel Case1.5% Full Scale Accuracy Ambient-Process Temp: -4F To + 150F, -20C To +65CMeets ASME B40.100 Standards(LT Items are Low Temp -76F To + 392F, -60C To +200C) WITH FACTORY FLANGE 1/4 NPT BRASS STEM MOUNT (2.5 DIAL)DialRangeBrown PlugDiameterSignifies Low TempPART No.(IN.)(P.S.I.)(kPa)Silicone Liquid PG-30SGRF40-300-200PG-100SGRF40-1000-700NOTE: After installation lift plunger toPG-100SGRFLT40-1000-700vent gauge PG-160SGRF40-1600-1,100VACUUM SERVICE 1/4 NPTBRASS STEM MOUNT (2.5 DIAL)For Dial Dia.RangePART No.(IN.)Vacuum(P.S.I.)PG-30SGV252.530-0 hg PG-30V30SG252.530-0 hg0-30VACUUM SERVICE 1/4 NPT BRASS CENTER BACK MOUNT(2.5 DIAL)For Dial Dia.RangePART No.(IN.)Vacuum(P.S.I.)PG-30CGV252.530-0 hg PG-30V30CG252.530-0 hg0-30PG-PM253 HOLE PANEL MOUNT MOUNTING BRACKETS(Only For Use With CenterFor Dial Dia.Back Mount Gauges.) PART No.(IN.)Description PG-MB252 SCREW U-CLAMP PG-MB252.52 Screw U-ClampPG-PM252.53 Hole Panel Mount(For Use With Center Back Or Stem Mount Gauges.)BRASS SNUBBERRangePART No.(P.S.I.)Pre-AssembledPG-SNUBBER*0-10,000(Viscous Fluids 40um)Brass 1/4 Female x 1/4 Male Protects gauges from shock. Ambient-Process Temp:- 65F To + 650F, - 54C To + 343CComplete with color coded interchangeable porosity elements. Standard fac-tory element is 40 um. Follow instructions for replacing element if required. (5 um, 10 um, 20 um, 25 um, 30 um) Suitable for Water, Air and Gasoline applications.*Conforms to requirements of MIL-D-2940A122122'