b'REUSABLE END FITTINGS FOR PTFE HOSEFOR USE WITH S.A.E. 100R14 SMOOTH BORE PTFE HOSE (Page 16)ALL WETTED PARTS ARE BRASSFemale ReplacementMale Pipe Swivel Sleeve37 S.A.E. Flare NominalNominal PART No.HoseI.D.PART No.Hose I.D.Pipe Nominal SR4S-41/4SR425-4A1/41/8 PART No.Hose I.D.Tube SR4S-63/8SR425-4B1/41/4 SR438-441/41/4 SR4S-81/2SR425-6B3/81/4 SR438-555/165/16 SR4S-105/8SR425-6C3/83/8 SR438-663/83/8 SR4S-123/4SR425-8D1/21/2 SR438-881/21/2SR425-10D5/81/2 SR438-10105/85/8SR425-12E3/43/4 SR438-12123/43/4Female D.O.T. Swivel Air Brake STAINLESS STEEL AVAILABLE45 S.A.E. Compression UPON REQUEST (SSR4 Series ) FlareNominalNominal PART No.Hose I.D.TubePART No.Hose I.D.Tube SR468-10105/85/8SR428-441/41/4SR428-555/165/16SR428-663/83/8SR428-881/21/2SR428-10105/85/8SR428-12123/43/4PTFE REUSABLE FITTINGS ASSEMBLY INSTRUCTIONSSTEP 1 STEP 4Wrap masking tape around hose atLubricate stem and shell threads. Push desired lengthand cut square withhose onto stem with twisting motionfine-tooth hack saw. Trim any looseuntil hose seats against stem chamfer.wires and slip two shells on back toPush shell forward and hand start back, placing them about 3 From eachthreading.end of hose.STEP 2 STEP 5Use a flat surface to push the sleeveWrench tighten stem until clearanceover the tube underneath the wire untilwith shell is 1/32 or less. Clean,the tube stock butts against the insideinspect and test.shoulder of the sleeve.STEP 3Mount stem hex in vise. Work the hose bore over the stem to size tube.51'