b'S.A.E. HYDRAULIC HOSEMEDIUM PRESSURE HOSEFor medium to high pressure hydraulic service in the handling of mosthydraulic fluids, gasoline, diesel fuels lubricating oils and water. Notsuitable with phosphate esters. CONSTRUCTION:One braid of high tensile steel wire reinforcementfor 1/4" ID Through to 1/2" ID hose.Two braids of high tensile steelwire reinforcement for 3/4" ID through to 1" ID hose. TUBE: Oil and heat resistant synthetic rubber inner tube COVER: Oil, weather and flame-resistant synthetic rubber cover. COLOUR: Black CS.A.E. 100R17TEMPERATURE: -40F to +212F,-40C to +100C PACKAGING: For reel lengths see below.(NON-SKIVE)FITTINGS: SC600 Compression (Page 75 - 76)COVER IS NOT REMOVED SC900 Bite-To-The-Wire (Page 77 - 78)Actual NominalMaximum Working Min. Burst Min. Bend Approx. Reel I.D. Hose O.D. Hose O.D. Pressure Pressure Radius Wgt. / Ft. LengthsPART No. (IN.) (IN.) (IN.) (P.S.I.) (P.S.I.) (IN.) (LBS.) (FT.)HR17-4-REEL 1/4 0.480 0.520 3,000 12,000 2.00 0.16 300HR17-6-REEL 3/8 0.610 0.670 3,000 12,000 2.50 0.24 300HR17-8-REEL 1/2 0.750 0.830 3,000 12,000 3.50 0.29 300HR17-12-REEL 3/4 1.090 1.190 3,000 12,000 4.75 0.55 250LOW TEMPERATURE MEDIUM PRESSURE HOSEFor Low Temperature medium to high pressure hydraulic service in thehandling of most hydraulic fluids, gasoline, diesel fuels lubricating oils andwater. Not suitable with phosphate esters. CONSTRUCTION:One braid of high tensile steel wire reinforcementfor 1/4" ID through to 1/2" ID hose.Two braids of high tensile steelwire reinforcement for 3/4" ID through to 1" ID hose. TUBE: Oil and heat resistant synthetic rubber inner tube COVER: Oil, weather and flame-resistant synthetic rubber cover. COLOUR: Black LOW TEMPERATURE:-67F to +212F,-55C to +100C PACKAGING: For reel lengths see below.S.A.E. 100R17FITTINGS: SC900 Bite-To-The-Wire (Page 77 - 78)(NON-SKIVE) Fairview Ltd. recommends the use of Bite-To-The-Wire fittings onlyfor our low temperature 100R17 hose.COVER IS NOT REMOVEDActual NominalMaximum Working Min. Burst Min. Bend Approx. Reel I.D. Hose O.D. Hose O.D. Pressure Pressure Radius Wgt. / Ft. LengthsPART No. (IN.) (IN.) (IN.) (P.S.I.) (P.S.I.) (IN.) (LBS.) (FT.)HR17LT-4-REEL 1/4 0.48 0.50 3,000 12,000 2.00 0.16 328HR17LT-6-REEL 3/8 0.61 0.63 3,000 12,000 2.50 0.24 328HR17LT-8-REEL 1/2 0.75 0.77 3,000 12,000 3.50 0.29 328HR17LT-10-REEL 5/8 0.94 0.96 3,000 12,000 3.94 0.32 250HR17LT-12-REEL 3/4 1.09 1.11 3,000 12,000 4.72 0.55 164HR17LT-16-REEL 1 1.42 1.44 3,000 12,000 5.90 0.95 164125'