b'PERMANENTLY ATTACHED HOSE ENDSFOR SAE 100R7, 100R8 AND 100R18 THERMOPLASTIC HOSE (Pages 108 - 110)NOT FOR USE ON REDUCED OD S.A.E. 100R7 Female 90 ELBOWMale Pipe NPSM Pipe S.A.E. 37(Swivel) Female FlarePART No.Hose I.D.Pipe PART No.Hose I.D.Pipe (Swivel)SCTP25-2A1/81/8 SCTP26SW-3B3/16 1/4SCTP25-3A3/161/8 SCTP26SW-4B1/4 1/4 PART No.Hose I.D.TubeSCTP25-3B3/161/4 SCTP26SW-6C3/8 3/8 SCTP39-343/161/4SCTP25-4A1/4 1/8 SCTP39-451/45/16SCTP25-4B1/4 1/4 SCTP39-663/83/8SCTP25-4C1/4 3/8 SCTP39-881/21/2SCTP25-5B5/161/4SCTP25-6C3/8 3/8 J.I.C. 37SCTP25-8D1/2 1/2 Male FlareSCTP25-12E3/4 3/4SCTP25-16H1 1PART No.Hose I.D.Tube 45 ELBOWSCTP37-663/8 3/8 J.I.C. 37Female FlareMale Pipe (Swivel)(WorkingSwivel) S.A.E. 37 PART No.Hose I.D.TubeFemale Flare SCTP40-663/83/8(Swivel)PART No.Hose I.D.PipeSCTP25SW-4B1/4 1/4 PART No.Hose I.D.TubeSCTP25SW-6C3/8 3/8 SCTP38-241/8 1/4SCTP25SW-8D1/2 1/2 SCTP38-343/161/4SCTP38-441/4 1/4 Female O-RingSCTP38-451/4 5/16 Face SealSCTP38-461/4 3/8 (Swivel)All hydraulic assemblies shouldSCTP38-663/8 3/8SCTP38-683/8 1/2 PART No.Hose I.D.ORFSbe pressure tested prior to use. SCTP38-881/2 1/2SCTP58-663/811/16 - 16SCTP38-12123/4 3/4CRIMP SPECIFICATIONS FOR PERMANENTLY ATTACHED HOSE ENDS (FOR USE WITH ALL HR7, HR8 & HR18 HOSE TYPES)DashInside DiameterCrimp OutsideAll hydraulic assemblies should Size(IN.) Diameter (IN.) -21/80.365 be pressure tested prior to use.-33/160.500 -41/40.555NOTE: Also see Fairviews -55/160.630 -63/80.675Accutek 100R7 lube hose ends -81/20.830 SC700 & SR700 series.-123/41.080 -1611.340IMPORTANT: This reference chart is provided by Fairview Ltd. for convenience only. The information contained herein cannot be guaranteed because conditions of use are beyond our control, such as variances in hose outside diameters. This document should not be substituted for the judgement of a quali ed professional. Assemblies should be tested prior to installation. The user of this information assumes all risk associated with its use.76'