b'CLAMPSQUICK RELEASE CLAMPS SPRING LOADED GEAR CLAMPSFOR USE WITH SILICONE COOLANT HOSE & TURBO CHARGERS ALL STAINLESS STEELConstructed from stainless steelmaterials for corrosion resistance.S.A.E. 1/2 INCH WIDE BANDThese clamps feature a unique quickHIGH CORROSION RESISTANCErelease design that allows for quick andeasy installation in restricted or difficultSPRING CONTRACTS AND EXPANDSareas. 5/16 slotted hexagon head and TO PREVENT COLD FLOW LEAKS1/2 wide band.PROVIDES PERMANENT JOINTSEALING FROM-40F to +450FAPPLICATIONS: -40C to +232CFor applications where clamp must be opened to bePACKAGING: 10 Piece Carton.applied. Used extensively in the telecommunicationsSizes 500 and up are Bulk.industry on cable enclosures where open air applicationsdemand durability. Range RangePART No. (IN.) (MM)PACKAGING: 10 Piece Carton. HC4-400 3.25 - 4.13 83 - 105Range Range ONE EAR CLAMPSPART No. (IN.) (MM)LAS-36 1.00-2.39 25 - 70 (With Mechanical Interlock)LAS-48 1.50-3.50 38 - 89LAS-56 1.00-4.00 25 - 101 Select Nominal Clamp SizeLAS-72 2.00-5.00 51 - 127 nearest to but larger than O.D. onLAS-88 2.06-6.00 52 - 152 Ewhich clamp is to be used.LAS-96 3.50-6.56 89 - 166LAS-104 1.75-7.00 44 - 178LAS-128 1.75-8.56 44 - 218 APPLICATIONS:LAS-152 2.00- 10.00 51 - 254 1-Ear clamps are intended for low pressure applications such asautomotive (not fuel lines), appliances, industrial machinery,LAS-188 2.06- 12.31 52 - 313 underground irrigation systems and beverage dispensingLAS-216 10.19 - 14.00 259 - 355 equipment.LAS-248 1.75 - 16.00 44 - 406LAS-312 1.88 - 20.00 48 - 508 SPECIFICATIONS:The standard HC8 series is manufactured from 1008 carbon steeltube and then zinc plated. Stainless steel clamps are manufacturedfrom type 304 AISI stainless.ONE EAR CLAMPS PACKAGING: 25 Piece Bags.Range RangePART No. (IN.) (MM)HC8-6 .350-.414 8.9- 10.5HC8-9 .496-.571 12.6 - 14.5HC8-11 .549-.669 15.1 - 17.0HC8-12 .669-.779 17.0 - 19.8HC8-14 .779-.890 19.8 - 22.6HC8-15 .839-.949 21.3 - 24.1HC8-21 1.181 - 1.303 30.0 - 33.1APPLICATIONS:One Ear Clamps are commonly used where a low profileprotrusion and a small, snug clamping range is of the essence. FUEL INJECTION HOSE CLAMPSThey are well suited for Original Equipment Manufacturer (OEM)or Maintenance, Repair and Overhaul (MRO). EPDM rubber APPLICATIONS:hose, plastic tube, electrical cable, strain relief, insert molding, Clamps are intended for low pressurewelding and heavily vibrating equipment hoses are readily applications such as automotive fuel injection.clamped.SPECIFICATIONS:Type 304 AISI stainless steel. NominalPACKAGING: 25 Piece Bags. Clamp Size Range RangePART No. (IN.) (IN.) (MM)Range Range HC21-4 1/4 7/32 - 5/8 5.5 - 15.87PART No. (IN.) (MM) HC21-5 5/16 5/16 - 7/8 7.94 - 22.22HC14-8-1/2 .476-.551 12.1-14.0 HC21-6 3/8 7/8 - 1 22.22 - 25.40157'