b'CYLINDERS AND TANK EQUIPMENTLIFT TRUCK CYLINDER RELIEF VALVEDesigned speci cally for use as a primary relief valve on DOT lift truck cylinders.All containers used in industrial truck service, including lift truck cylinders, should have the relief valve re-placed with a new or unused valve within 12 years of the manufacture date of the container and each 10 years thereafter. Can be used on cylinders up to 100 lbs. LP-Gas capacity.InletPressureConnectionSettingPART No. (IN.)(PSIG)20703/4 - 14 NPT375LIFT TRUCK AND ENGINE FUEL VALVEDOT Lift truck Service ValveDesigned to allow either vapor or liquid withdrawal. Integral excessow valve helps prevent excess product loss in the event of fuel line rupture. Must be used in a cylinder with an independent pressure relief valvesuf cient for cylinders capacity. Stem design features a double O-Ring seal to provide extra protection from leakage. Extra low pro le reduces potential for valve and handwheel damage when cylinders are stacked on each other.InletOutletExcessForConnectionConnectionFlowServicePART No. (IN.)(IN.)ValveMarked20753/4-14 NPT3/8-18 NPT1.6 GPMLiquidFIXED LIQUID LEVEL GAUGESLarge knurled knob for easy gripping when wearing gloves. Knurled knob is retained to prevent dropping or lost plugs duringllings. Designed to provide a visible warning when containers arelled to the maximum permittedlling level.InletDiptube ConnectionLength PART No. (IN.)(IN.)Service20651/4 NPTNoneCylinderLIFT TRUCK BACK CHECK CONNECTORSThese quick closing couplings are designed to join the fuel line to the service valve on motor fuel type applications. ACME thread allows quick hand-tight assembly.Back checks automatically close when disconnected.2088 InletOutletPART No.ConnectionConnectionApplication20881-1/4 F ACME1/4 FNPTFuel Line20893/8 FNPT1-1/4 M ACMEService Valve2089 2089-GASKETSecondary Gasket Seal2089-ORPrimary Gasket Seal232'