b'STEEL HOSE ENDSLUBE HOSE ENDS FOR USE WITH S.A.E. 100R7 HOSE (Page 118 - 121)S.A.E. STEEL REUSABLE HOSE ENDSMale Pipe FemaleFlare(Swivel) S.A.E.PART No. Hose I.D. PipeB SC725-2A 1/8 1/8 FemaleSC725-3A 3/16 1/8 Flare (Swivel)SC725-4B 1/4 1/4 PART No. Hose I.D. TubeSC738-24 1/8 1/4 PART No. Hose I.D. TubeSC738-34 3/16 1/4 SR738-24 1/8 1/4SC738-44 1/4 1/4SC738-46 1/4 3/8Male Pipe(Swivel) Male Pipe(Swivel)PART No. Hose I.D. Pipe PART No. Hose I.D. PipeSC725SW-2A 1/8 1/8 SR725SW-2A 1/8 1/8CRIMP SPECIFICATIONS FORPERMANENTLY ATTACHED HOSE ENDSAll hydraulic assemblies should DASH HOSE Crimp DIA.be pressure tested prior to use. HOSE DESCRIPTION SIZE I.D. SC700 SeriesHR7 S.A.E. 100R7 -2 1/8 0.3650NOTE: Fairviews Accutek 100R7 -3 3/16 0.5100hose ends are not to be swaged. -4 1/4 0.5550IMPORTANT: This reference chart is provided by Fairview Ltd. for convenience only. The information contained herein cannot be guaranteedbecause conditions of use are beyond our control, such as variances in hose outside diameters. This document should not be substitutedfor the judgement of a qualified professional. Assemblies should be tested prior to installation. The user of this information assumes all riskassociated with its use.STEEL HOSE INSERTSFOR USE WITH 100R4 HOSE (Page 117)CONNECTOR 90 ELBOW 45 ELBOWHose Insert To Hose Insert To Hose Insert ToMale Pipe Male Pipe Male PipePART No. Hose I.D. Pipe PART No. Hose I.D. PipePART No. Hose I.D. Pipe S1140-10D 5/8 1/2S1125-10C 5/8 3/8 S1139-10D 5/8 1/2S1125-10D 5/8 1/2 S1140-12E 3/4 3/4S1139-12E 3/4 3/4S1125-12E 3/4 3/4 S1139-16H 1 1S1125-16E 1 3/490 ELBOWHose Insert ToCONNECTORMale O-RingHose Insert To 45 ELBOWMale O-Ring Hose Insert ToMale O-Ring PART No. Hose I.D. O-RingPART No. Hose I.D. O-Ring SO1139-4 1/4 7/16 - 20SO1125-6 3/8 9/16 - 18 SO1139-6 3/8 9/16 - 18SO1125-16 1 1-5/16 - 12 SO1139-8 1/2 3/4 - 16SO1125-1612 1 1-1/16 - 12 PART No. Hose I.D. O-Ring SO1139-16 1 1-5/16 - 12SO1125-20 1-1/4 1-5/8 - 12 SO1140-16 1 1-5/16 - 12 SO1139-1612 1 1-1/16 - 1284'