b'POLYETHYLENE TUBE360- YEL ORA RED GRN BLU BLKPolyethylene tube is manufactured from F.D.A. ORDERING INFORMATIONapproved resins. It has very low moisture absorption. Itis fungus resistant, non-corrosive, and highly resistantPACKAGING: 100 FT. COILSto stress cracking. 500 AND 1000 FT. REELS ON 360 TUBETO ORDER REELS CHANGE -100 TO -500OR -1000It is suitable for air and water applications and is usedfor beverage and soda transfer.TEMPERATURE: LOW DENSITY -40F to +160F, -40C to +71CIt is available in two types, low and high density. Low HIGH DENSITY -40F to +250F, -40C to +121Cdensity provides flexibility and high density, while not asFITTINGS: 400 Series (Page 13) WARNINGflexible, has a higher temperature and pressure rating. 500 Series (Page 14 - 15) USEOFTHISTUBEWITHPC Series(Page 26 - 27) FITTINGS OTHER THAN FAIRVIEW900 Series (Page 74) ORIGINAL WILL VOID WARRANTY.JOHN GUEST (Page 20 - 24)NOTECOLOR CODES:360 series only: BLK (Black), BLU (Blue),GRN (Green),THEWORKINGPRESSURESLISTEDFORTHEPOLY ORA (ORANGE), Red (Red), YEL (Yellow) DTUBES ARE RATED AT +70F, +21C. ANY AMBIENT OR NOT ALL SIZES ARE AVAILABLE IN ALL COLORS.INTERNAL INCREASE IN TEMPERATURE WILL LOWERTHEABOVELISTEDWORKINGPRESSURES.THESE MINIMUM RUNS MAY APPLY.TUBESARENOTRECOMMENDEDFORMILK NOTE: To order a color suffix the size code with a color codeCONTACT. Example: 360-6GRN-100, 360-6RED-1000.For natural color(opaque)omit the color code. Dark colors have better U.V. resistance for outdoor applications. LOW DENSITY HIGH DENSITYWorking WorkingTube O.D. Actual I.D. Wall Pressure Tube O.D. Actual I.D. Wall PressurePART No. (IN.) (IN.) Thickness (P.S.I.) PART No. (IN.) (IN.) Thickness (P.S.I.)360-4-100 1/4 .170 .040 125 359-4-100 1/4 .170 .040 250360-4-1000 1/4 .170 .040 125 359-4-1000 1/4 .170 .040 250360-4H-100 1/4 .125 .062 170 359-4H-100 1/4 .125 .062 280360-5-100 5/16 .187 .062 130 359-5-100 5/16 .187 .062 250360-6-100 3/8 .250 .062 100 359-6-100 3/8 .250 .062 250360-8-100 1/2 .375 .062 90 359-8-100 1/2 .375 .062 250360-10-100 5/8 .500 .062 80 359-10-100 5/8 .500 .062 160360-12-100 3/4 .625 .062 60 359-12-100 3/4 .600 .075 160LINEAR LOW DENSITY POLYETHYLENE TUBEThe John Guest PE Range of plastic tubing is produced inLLDPE(Linear Low Density Polyethylene) for cold and intermittent hot waterapplications. N denotes natural color. To request other colors please referto the table below. John Guest Polyethylene tubing is designed for usewith John Guest Super Speedfit push-fit fittings, John Guest Shut-OffValves and virtually all standard tube connectors.Standard Colors Available: Tube Working-N=Natural, -B=Blue, -E=Black, -R=Red, -W=White O.D. Length Pressure Other special colors available on request: PART No. Color (In.) (Ft.) (PSI)-O=Orange, -G=Green, -Y=Yellow PE-08-BI-0500F-B Blue 1/4 500 145Features: PE-08-BI-0500F-E Black 1/4 500 145Linear low density polyethylene Suitable for cold and intermittent PE-08-BI-0500F-G Green 1/4 500 145hot water applications. Broad chemical compatibility PE-08-BI-0500F-N Natural 1/4 500 145PE-08-BI-0500F-R Red 1/4 500 145FDA and NSF certified PE-08-BI-0500F-W White 1/4 500 145Strong, flexible and robust.PE-10-CI-0500F-N Natural 5/16 500 1455/16 and 1/2 tube sizes are also available on request. PE-12-EI-0500F-B Blue 3/8 500 100Metric sizes available. PE-12-EI-0500F-E Black 3/8 500100147'